Franklin, NH · EPA ID NH0851010
Franklin Water Works drinking water records
Franklin Water Works has no health-based violations since 2016 in EPA records. It serves about 7,200 people in Franklin, NH using groundwater (wells). Total violations on record (all years, including paperwork): 1. All recorded violations are marked returned to compliance or resolved.
Lead and copper tap sampling
Under EPA's Lead and Copper Rule the system samples taps in homes, and reports the 90th-percentile result: 90% of homes tested were at or below this level. A result above the action level (lead 0.015 mg/L, copper 1.3 mg/L) is not itself a violation; it requires the system to take extra steps. A violation happens when a required step or test is missed.
| Sampling period | Metal | 90th percentile | Action level | Above action level? |
|---|---|---|---|---|
| 2024-01-01 to 2024-12-31 | Lead | 0.003 mg/L | 0.015 mg/L | No |
| 2023-01-01 to 2023-12-31 | Lead | 0.002 mg/L | 0.015 mg/L | No |
| 2022-01-01 to 2022-12-31 | Lead | 0.002 mg/L | 0.015 mg/L | No |
| 2021-07-01 to 2021-12-31 | Lead | 0.001 mg/L | 0.015 mg/L | No |
| 2021-01-01 to 2021-06-30 | Lead | 0.002 mg/L | 0.015 mg/L | No |
| 2015-01-01 to 2017-12-31 | Lead | 0.006 mg/L | 0.015 mg/L | No |
Lead often comes from a home's own service line, solder or fixtures, so your tap can differ from these results. Only a test of your own tap tells you what is in it.
Data dates
| Official system name | FRANKLIN WATER WORKS |
|---|---|
| EPA system ID (PWSID) | NH0851010 |
| Latest lead/copper sampling period | 2024-01-01 to 2024-12-31 |
| Latest violation period in record | 2007-07-01 |
| Published by | NH DES, reported to EPA SDWIS/Fed (quarterly) |
| Imported by TapWaterPro | October 30, 2026 |
| Verified | Checked against the EPA Envirofacts record on October 30, 2026; not an independent water test |
System facts
| EPA system ID | NH0851010 |
|---|---|
| Population served | 7,200 |
| Service connections | 2,500 |
| Water source | groundwater (wells) |
| Owner type | local government |
| Town / county | Franklin, Merrimack County |
Violations since 2016, in plain words
None since 2016.
"Health-based" means a contaminant went over a legal limit or a required treatment step was missed. Monitoring and reporting violations mean a test or report was late or missing; they do not by themselves mean the water was unsafe.
Full violation history
| Period began | What | Type | Measured / legal limit | Health-based? | Status |
|---|---|---|---|---|---|
| 2007-07-01 | Consumer Confidence Report (annual water quality report) | Notice or paperwork requirement missed | — | No | Resolved 2009-01-31 |
What you can do
- Read the system's annual Consumer Confidence Report (water quality report); systems must mail or post it each year. You can also ask Franklin Water Works for it directly.
- If your home was built before 1986, lead can come from your own pipes and fixtures even when the utility's water is fine. Run the tap 30 seconds to 2 minutes before drinking if water sat for hours, and use cold water for cooking.
- If you want extra protection, choose a filter certified to NSF/ANSI 53 (lead) or 58 (reverse osmosis); a simple carbon filter certified to NSF/ANSI 42 helps mainly with chlorine taste.
- This system uses wells; NH groundwater can carry naturally occurring arsenic, radon and uranium, which the system must test for.
- On a private well? This system's results do not apply to you. NH DES recommends yearly bacteria and nitrate tests and a Standard Analysis every 3-5 years. Private well guide